Boundary Dam Power Station

From SourceWatch
(Redirected from Boundary Dam power station)
Jump to navigation Jump to search

{{#badges: CoalSwarm|Navbar-Canadacoal}}Boundary Dam Power Station is the largest coal fired station owned by SaskPower, located near Estevan, Saskatchewa, Canada. The plant currently has an installed capacity of 703 megawatts (MW).

The rebuilt unit 3 is also known as the Boundary Dam Integrated Carbon Capture & Storage Demonstration Project.

Location

The undated satellite photo below shows the plant, which is located near Estevan, Saskatchewan, Canada. There is also Boundary Dam (constructed in 1957) located next to the station. It is an earth fill dam, which created the Boundary Reservoir on Long Creek a few kilometres west of the river's mouth on the Souris River. The station uses water from the reservoir for coolant.

Loading map...

Description

The Boundary Dam Power Station consists of:[1]

  • Units 1-2, 62 MW each, commissioned in 1960. Unit 1 was retired in May 2013,[2] and unit 2 in 2014.[3]
  • Units 3-5, 150 MW each, units 3-4 were commissioned in 1970 and unit 5 in 1973. Unit 3 was shut down and rebuilt with a Carbon Capture and Storage Unit added, with the Rebuilt Unit 3 (110 MW) commissioned in October 2014.[4]
  • Unit 6 - a 293 MW unit commissioned in 1978.[1]

Retirements

Units 1-2

In May 2013 SaskPower announced the retirement of the 62 MW Unit 1 after over 50 years in operation. In a media release SaskPower stated that the closure followed "federal carbon dioxide (CO2) regulations that were announced in 2012, calling for coal-fired units which have been operating for 50 years or more to meet new emissions standards by July 1, 2015. Retrofitting Unit #1 in time to meet the new regulations was not deemed economically feasible by SaskPower."[1]

SaskPower stated that at the time of the closure the unit generated "approximately 350,000 tonnes" of carbon dioxide emissions.[1]

Unit 2 was retired in 2014.[3]

Units 4-5

In July 2018, SaskPower and the Saskatchewan government said there was “simply not a business case” to retrofit Boundary Dam units 4 and 5 with carbon capture and storage (CCS), as they did unit 3.[5] Without CCS, federal regulations require the units retire by 2019. The provincial government hopes to extend the lifespan of Boundary Dam unit 4 and 5 to 2021 and 2024, respectively, but will need approval from the Canadian government.[6]

On December 29, 2018 the Canadian Government published a draft "equivalency agreement" with the Saskatchewan provincial government which is open for public comment for 60 days. Under the terms of the agreement SaskPower's Boundary Dam Units 4 & 5 would be allowed to operate respectively until December 2021 and 2024.[7]

Carbon Capture and Storage Demonstration Project

The Boundary Dam Integrated Carbon Capture & Storage Demonstration Project is a US$1.4 billion project to retrofit the coal-fired unit 3 with carbon capture and an enhanced oil recovery system.[8] The project when complete is expected to result in 1 million tonnes/year reduction in CO2 emissions. It will also reduce the output of Unit 3 from 139 MW to 110 MW.[9] The Canadian federal government paid $240 million towards the project.[9]

In July 2018, SaskPower and the Saskatchewan government announced they will not be expanding carbon capture and sequestration (CCS) technology on any more coal-fired plants in the near future. Dustin Duncan, the minister responsible for SaskPower and the environment, said there is “simply not a business case” to retrofit Boundary Dams 4 and 5.[10]

Articles and resources

Related SourceWatch articles

References

External links

Wikipedia also has an article on Boundary Dam power station (Boundary Dam power station). This article may use content from the Wikipedia article under the terms of the Creative Commons Attribution-ShareAlike 3.0 Unported License]